Touch 2 smart vibrator

Touch features a silicone exterior and an elegant, ergonomic design that makes it one of our most alluring and attractive products. As if that weren’t enough, the digital control lets you adjust the intensity of the vibrations. Features Touch technology; vibrates at the level you press. 2 motors for intense simultaneous stimulation of the clitoris and G-spot. 1. To charge your vibrator, connect the USB cable from the charger to a USB adapter (a 5V/1A adapter is recommended). Connect the other end of the USB cable to the base of the vibrator (at the bottom of the vibrator). Whilst charging, a blue indicator light on the control panel will flash to show that charging is in progress. Once fully charged, the light will stop flashing to indicate that it is ready for use. Please note that when using it for the first time, or if you haven’t used it for a long time, the light may not come on for a few minutes. 2. If you wish to use it for internal massage, please use a condom. 3. To switch on your vibrator, please press and hold the button for 3 seconds. 4. If you press the button briefly, the vibrator will switch to manual mode and the first vibration setting. Each time you press the button, the vibration mode will change, cycling through the 10 available modes. In standby or manual mode, holding down the button will switch the vibrator to automatic mode. The vibration mode starts when you touch the sensitive metal area around the control panel. 5. To switch off the vibrator, hold down the button for 3 seconds. 6. Each time you use it, be sure to clean your vibrator with warm water and antibacterial soap. After cleaning, dry it with a clean, soft towel and store it in the bag provided in a cool, dry place. Touchez 2 Vibrator USB cable Satin cover 1-year warranty User Manual Instructions for use